Please visit us at VVS'17! Se hvad der rør sig på ... VVS'17 || See what is going on... ...
pipe heat exchanger
Double-walled copper pipe
|1||Valve cap Ø90||ABS||–||1|
|6||Adjustable foot||Steel / Plastic||–||4|
|7||Input connector 1/2”||Brass||M||1|
|8||Output connector 1/2”||Brass||M||1|
|9||Water discharge Ø40||PVC||M||1|
|*During installation, installer chooses between trap or filter and, consequently, between siphoned or non-siphoned system|
|Heat exchanger material||–||Copper|
|Weight||Kg||6.0* / 6.5**|
|Temperature range||ºC||0 – 60|
|Maximum shower flow||l/min||30.0|
|Maximum mains water inlet pressure||Bar||16.0|
|Minimum mains water inlet pressure||Bar||1.0|
|Pressure drop with mains water at 9.2 L/min||Bar||0.27* / 0.36**|
|Pressure drop with mains water at 12.5 L/min||Bar||0.48* / 0.65**|
(*) ZYPHO single-walled version; (**) ZYPHO double-walled version
The values to the right were obtained under the following conditions:
Cold mains water: 10°C
Shower water: 40°C
|5.8 l/min||29.4 %|
|9.2 l/min||27.3 %|
|12.5 l/min||25.7 %|
The ZYPHO can be installed in two ways:
a) Coupled to the shower tray.
b) Placed under the shower tray or bathtub with desired separation.
Cold mains water is connected to the ZYPHO inlet.
Preheated water exiting the ZYPHO can be connected in one of the three following configurations:
a) To the shower mixing faucet (cold mains water) and to the domestic water heater inlet. This configuration provides a maximum of recovered energy.
b) To the shower mixing faucet (cold mains water) only. We recommend this configuration if the water heating device is located far or if connection to it is unreasonably difficult.
c) To the water heater inlet only.
The ZYPHO is a versatile system which thanks to its unique design can be adopted in various situations, for example:
- Domestic bathrooms;
- Swimming pools & Spas;
- Sports facilities;